Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 87

Dubbing only desired scenes
– Digital program editing (on
tapes)
You cannot record on the VCR when:
– The tape has run out.
– The write-protect tab on the cassette is set to
lock.
– The IR SETUP code is not correct (when IR is
selected).
– The button to cancel recording pause is not
correct (when IR is selected).
NOT READY appears on the screen when:
– The program to operate Digital program
editing has not been made.
– i.LINK is selected but the i.LINK cable (DV
connecting cable) is not connected.
– The power of the connected VCR is not turned
on (when you set i.LINK).
87