Recording An Image From A Tape As A Still Image - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Recording an image
from a tape as a still
image
Your VCR can read moving picture data
recorded on a tape and record it as a still image
on a "Memory Stick." Your VCR can also take in
moving picture data through the input connector
and record it as a still image on a "Memory
Stick."
Before operation
•Insert a recorded tape into your VCR.
•Insert a "Memory Stick" into your VCR.
(1) Set the POWER switch to ON.
(2) Press H. The picture recorded on the tape is
played back.
(3) Keep pressing PHOTO lightly until the
picture from the tape freezes. CAPTURE
appears on the screen. Recording does not
start yet.
(4) Press PHOTO deeper. The image displayed
on the screen will be recorded on a "Memory
Stick." Recording is complete when the bar
scroll indicator disappears.
3
PHOTO
(1)
(2)
(3)
(4)
MENU
2
4
CAPTURE
PHOTO
H
PLAY
REW FF
127