Table of Contents
Advertisement
PREPARING THE FABRIC
Display
No.
Name
0
Change the setting to embroider
the pattern with a single color.
Uninterrupted
Press the key again to return to the
embroidery
original setting.
key
Even if uninterrupted embroidering
thread cutting function and the
thread trimming function can be
used.
The icons of the spool of thread
are grayed out.
A
Rearrange the embroidery order
and sort it by thread colors.
Thread color
sorting key
B
Press this key to align the
embroidering position.
Embroidery
positioning
key
C
Save the pattern to the machine's
memory or USB media. The
Memory key
pattern can also be transferred to
a computer via a wireless network
connection.
D
Check the position of the pattern.
•
Trial key
trace the embroidery area of the
pattern. This allows you to
check that there is enough
space to embroider the pattern.
•
the selected position.
E
Specify the needle start position.
•
Starting point
position to the lower-left corner
key
of the pattern. This setting is
useful when connecting
patterns since it allows you to
continue embroidering until the
first stitch of the next pattern.
•
the selected position.
F
Move the needle forward or back
in the pattern; useful if the thread
Forward/Back
breaks while embroidering or if
key
you want to start again from the
beginning.
G
Set automatic thread cutting,
thread trimming or the thread
Cut/Tension
tension. For embroidery, these
key
functions are set automatically.
H
Return to the edit screen.
Return key
122
Explanation
has been set, the automatic
: Move the carriage to
: Move the carriage to
143, 144
: Set the needle start
: Move the carriage to
139-142
PREPARING THE FABRIC
Page
—
• Use fabrics with a thickness of less than 3 mm
(approx. 1/8 inch). Using fabrics thicker than 3
mm (approx. 1/8 inch) may cause the needle to
break.
Note
• When using layers with thicker batting etc., you can
120
embroider more attractive finishes by adjusting the
embroidery presser foot height in the embroidery
settings screen.
Press
128
[Embroidery Foot Height] in the embroidery
settings screen. Adjust the presser foot height for
thick or puffy fabrics.
146
• To increase the space between the embroidery foot
and the right side of the fabric, set the [Embroidery
Foot Height] to a larger number.
129
• In the case of thick terry cloth towels, we
recommend that you place a piece of water soluble
stabilizer on the top surface of the towel. This will
help to reduce the nap of the toweling and result in
more attractive embroidery.
Attaching Iron-on Stabilizers (Backing) to
the Fabric
• Always use a stabilizer material for embroidery
when embroidering on stretch fabrics,
lightweight fabrics, fabrics with a coarse
weave, or fabrics which cause pattern
shrinkage. Otherwise, the needle may break
and cause injury.
a
Iron the iron-on stabilizer material to the wrong side of
133
the fabric.
• Use a piece of stabilizer which is larger than the
embroidery frame being used.
—
CAUTION
, and use
and
in the
CAUTION
1 Fusible side of stabilizer
2 Fabric (wrong side)
3 Size of the embroidery
frame
c
a
Advertisement
Table of Contents
