Making Adjustments - Baby Lock BLTA Instruction & Reference Manual

MAKING ADJUSTMENTS

Your stitch pattern may sometimes turn out poorly,
depending on the type or thickness of fabric, the stabilizer
material used, sewing speed, etc. If your sewing does not
turn out well, sew trial stitches using the same conditions
as the real sewing, and adjust the stitch pattern as
explained below. If the stitch pattern does not turn out well
even after making adjustments based on the stitch pattern
described below, make adjustments for each stitch pattern
individually.
Memo
• For details on stitch patterns, refer to "STITCH
SETTING CHART" on page 190.
• This adjustment can be made to
stippling stitch),
stitch), (4-24 Eyelet stitch),
eyelet stitch), (Q-15 Quilting stippling stitch)
and stitch patterns from the following categories.
a
Press and select
b
Attach monogramming foot "N" and sew the stitch
pattern.
Be sure to use monogramming foot "N". Adjustments
may not be made correctly with any other presser foot.
c
Compare the finished stitch pattern to the illustration
of the correct stitch pattern below.
d
Press , and then adjust the stitch pattern with the
[Fine Adjust Verti.] or [Fine Adjust Horiz.] displays.
(1-36 Quilting
(2-21 Decorative stippling
(4-25 Star
(6-284).
 If the stitch pattern is bunched:
Press in the [Fine Adjust Verti.] display.
 The displayed value increases each time the button is
pressed and the stitch pattern will lengthen.
 If the stitch pattern has gaps:
Press in the [Fine Adjust Verti.] display.
 The displayed value decreases each time the button
is pressed and the stitch pattern will shorten.
 If the stitch pattern is skewed to the left:
Press in the [Fine Adjust Horiz.] display.
 The displayed value increases each time the button is
pressed and the stitch pattern will slide to the right.
 If the stitch pattern is skewed to the right:
Press in the [Fine Adjust Horiz.] display.
 The displayed value decreases each time the button
is pressed and the stitch pattern will slide to the left.
e
Sew the stitch pattern again.
* If the stitch pattern still comes out poorly, make
adjustments again. Adjust until the stitch pattern
comes out correctly.
* You can sew with the setting screen on the display.
f
Press to return to the original screen.
MAKING ADJUSTMENTS
3
97