System Configuration Via A Lan; Conference; And Isdn For Multipoint Data Conference - Sony PCS-G70 Operating Instructions Manual

System Configuration via a LAN and ISDN for Multipoint Data

Conference

Installing the optional PCSA-M3G70 H.323 MCU software, the PCS-M0G70
H.320 MCU software, and using the optional Data Solution Box PCS-DSB1S
and ISDN Units PCSA-B384S, PCSA-B768S, or PCSA-PRI enables you to
conduct multipoint mixed LAN and ISDN line multipoint data conferences.
Two Communication Terminals where the MCU software is installed must be
connected via a LAN in this configuration.
This allows you:
• To hold a multipoint videoconference among up to six sites over ISDN.
• To show still images stored on a "Memory Stick".
• To use data from a computer or other such peripheral device in the
videoconference.
• To show still images or computer data on the second monitor or projector
used as the display device.
• To connect up to five external microphones to the Data Solution Box,
allowing you to hear several participants.
System configuration
1 PCS-PG70/PG70P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit
3 PCS-RG70 Remote Commander
4 TV monitor (not supplied)
5 PCSA-M3G70 H.323 MCU software (not supplied)
6 PCSA-DSB1S Data Solution Box (not supplied)
7 PCS-A1 Microphone (not supplied)
8 PCSA-M0G70 H.320 MCU software (not supplied)
9 PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN
Unit (not supplied)
22
System Configuration
*
*
Be sure to connect two
Communication Terminals, with
the MCU software installed, via
a LAN.
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.