Sony PCS-G70 Operating Instructions Manual page 106

.
First monitor
Additional monitor A
(projector, etc.)
S-video cable (not supplied)
• When you want to conduct a videoconference using the dual video function, the
H.239 setting of the Communication Setup menu of both local and remote terminals
must be "On".
• Up to four monitors can be connected to the system. However, only three monitors,
including the first monitor, can be used at one time.
For details, see "Using Multiple Monitors" on page 122. The dual video
function can only be used in a two-point videoconference.
106
Conducting a Videoconference Using the Dual Video Function
First camera
PCSA-CG70/
CG70P Camera
Unit (supplied)
Camera cable
(supplied)
to MAIN CAMERA
to VIDEO OUT
MONITOR 2
to S-video input
Camera cable (supplied)
to SUB CAMERA
PCS-PG70/PG70P
Communication Terminal
to DSB
to RGB
OUT
PCSA-DSB1S
Data Solution Box
(not supplied)
Signal cable
(not supplied)
Signal cable
(not supplied)
Second camera
Additional monitor B
(projector, etc.)
Additional monitor C
(projector, etc.)