Displaying The Picture On A Projector Or Monitor; Monitor - Sony PCS-G70 Operating Instructions Manual

Displaying the Picture on a Projector or

Monitor

When you connect the Data Solution Box to the Communication Terminal,
connections with external monitors, etc. using the following four outputs are
available. The connections allow output of the picture to one, two or three
monitors selected from among four.
Monitor A
to VIDEO OUT
MONITOR 1
Monitor D
Outputting the Signal to One Monitor
Select the output with "Monitor Out" in the Video Setup menu.
VIDEO 1: Outputs the signal to the monitor (monitor A in the illustration
above) connected to the VIDEO OUT MONITOR 1 connector of the
Communication Terminal.
VIDEO 2: Outputs the signal to the monitor (monitor B in the illustration
above) connected to the VIDEO OUT MONITOR 2 connector of the
Communication Terminal.
RGB OUT: Outputs the signal to the monitor (monitor C in the illustration
above) connected to the RGB OUT connector of the Communication
Terminal.
to RGB OUT on the
PCSA-DSB1S

Displaying the Picture on a Projector or Monitor

Monitor B
to VIDEO OUT
MONITOR 2
to RGB OUT
Monitor C
151