Freezing An Input Image - Frame Memory; Function - Sony DFS-700 Operating Instructions Manual

Freezing an Input Image — Frame Memory

Function

Procedure
Using the frame memory function, you can capture a "freeze frame" from
input video or store a still frame. You can then use this still image as a
video source.
To capture a freeze frame in memory, use the following procedure.
TITLE DSK EDGE
1 2
EDITOR LUM LUM LUM TRAIL
SHADOW
GPI CRK CRK BORDER BEVELD
EDGE
SET UP MASK MASK MASK SOFT
SHIFT CCR LIGHTING MATTES BORDER
CCR TITLE 1 TITLE 2
SOURCE SOURCE
3
AUXILIARY
BLACK 1 2 3 4
BACKGROUND
1 2 3 4
BLACK
4
FOREGROUND
BLACK 1 2 3 4
1
If the FREEZ button is lit, press it, turning it off.
2
In the delegation section press the MEMORY button, turning it on.
3
Press one of the AUXILIARY buttons, turning it on, to select the input
video signal.
4
Press the MEMORY button in the BACKGROUND bus button row,
turning it on.
5
• To capture a frame from still video, press the FRAME button turning
it on.
• To capture a field from moving video, leave the FRAME button off.
(Pressing the FRAME button toggles it on and off.)
6
Press the FREEZ button, turning it on, to capture the image. (For
capture from a moving video input, press the FREEZ button at the
point you want to capture.)
The captured image appears on the output bus, and is written to
memory.
Note
Even if other than MEMORY is selected on the BACKGROUND bus
buttons, you can still capture the selected image with an AUXILIARY
button.
2 5 1,6
USER PGM
STATUS EDIT
INITIAL EDIT
PATTERN PAGE F1 F2 F3 F4 F5
ADJ
EFFECT
DSK
TRANS RATE PATTERN NUMBER
FTB
SET
DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT
FILL
5 6 7 8 MEMORY INT TITLE
VIDEO
INT
5 6 7 8 CUT
MEMORY
VIDEO
AUTO
INT
5 6 7 8 MEMORY
VIDEO TRANS
Chapter 3 Basic Operation
SNAP SHOT
LEARN
RECALL
LOCATION
HOLD
INPUT
SET
N/R REV DIRECT DIRECT DSK PVW
RECALL PATTERN
LAST X FADE
TO
7 8 9
INS BLACK
4 5 6
DEL
P IN P
DSK
1 2 3
RST
DOWN UP ENTER
0
PATTERN/KEY PAD
3-61