Model; Getting Started; Unpacking; Hookup Overview - Sony STR-435 Operating Instructions Manual

Getting Started

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander (remote) (1)

Model

STR-DE535
STR-DE435
• LR6 (size-AA) batteries (3) (STR-DE535 only)
• R6 (size-AA) batteries (2) (STR-DE435 only)
• Operating Instructions of the remote (1)
• Operating Instructions of CONTROL A1 II (1)
(STR-DE535 only)
Inserting batteries into the remote
Insert the LR6 (STR-DE535) or R6 (STR-DE435) (Size
AA) batteries with the + and – properly oriented in the
battery compartment. When using the remote, point it
at the remote sensor
DE435) on the receiver.
For details, refer to the operating instructions supplied
with your remote.
You cannot operate the following buttons on the
RM-PP402 remote (STR-DE435 only)
• VIDEO2
• VIDEO3
• DVD
• PHONO
• SOUND FIELD A. F. D.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4 US
Remote
RM-LJ302
RM-PP402
(STR-DE535) or g (STR-

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 28.
Video Component
Hookups (6)
TV monitor
TV tuner
Speaker
System
SAT (Satellite
Hookups (7)
receiver)/LD
player
Front
speaker
VCR
(L)
CD player
speaker
Rear
speaker MD/Tape deck
(L)
Turntable
(STR-DE535
only)
Audio Component
Hookups (5)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
DVD player/AC-3
decoder
Antenna Hookups (5)
AM/FM antenna
Front
speaker
(R)
Center Active
Rear
woofer
speaker
(R)