Table of Contents
Advertisement
Getting Started
Unpacking
Check that you received the following items with the
receiver:
• FM wire aerial (1)
• AM loop aerial (1)
• Remote commander (remote) (1)
Model
STR-V525
STR-V424
• LR6 (size-AA) batteries (3) (STR-V525 only)
• R6 (size-AA) batteries (2) (STR-V424 only)
• Operating Instructions of the remote (1)
• Operating Instructions of CONTROL A1 II (1)
(STR-V525 only)
Inserting batteries into the remote
Insert the LR6 (STR-V525) or R6 (STR-V424) (Size AA)
batteries with the + and – properly oriented in the
battery compartment. When using the remote, point it
at the remote sensor
on the receiver.
For details, refer to the operating instructions supplied
with your remote.
You cannot operate the following buttons on the
RM-PP402 remote (STR-V424 only)
• VIDEO2
• VIDEO3
• DVD
• PHONO
• SOUND FIELD A. F. D.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4
GB
Remote
RM-LJ302
RM-PP402
(STR-V525) or g (STR-V424)
Hookup Overview
The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 28.
Video Component
Hookups (6)
TV monitor
Speaker
TV tuner
System
Hookups (7)
LD player
Front
speaker
VCR
(L)
CD player
speaker
Rear
MD/Tape deck
speaker
(L)
Turntable
(STR-V525
only)
Audio Component
Hookups (5)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
DVD player/AC-3
decoder
Aerial Hookups (5)
AM/FM aerial
Front
speaker
(R)
Center
Active
Rear
woofer
speaker
(R)
Advertisement
Table of Contents
