A
F
24
5
C
N
35
Fig. 4
Gun Disassembly and Assembly
Disassembly
1.
Relieve pressure; page 3.
2. Follow steps 1 to 7 under Valve Stem and Seal
Service.
3. Fig. 6. Remove two retaining rings (8), rod (13)
and trigger (29).
Service
3
42
17
F
28
A
20
1
27
H
E
NOTES:
A
Torque to 6–10 in-lb (0.68–1.13 NSm)
C
Torque to 26–32 ft-lb (35.3–43.4 NSm)
E
Apply lithium base grease to threads
F
Apply lithium base grease
H
Torque to 100–125 in-lb (11.3–14.1 NSm)
N
Apply high strength anaerobic sealant (red)
4. Unscrew setscrew (42), then unscrew fluid tube
assembly (19) from gun body (17).
To avoid loosening connections and damaging gun,
grip gun body (17), not handle (14), when removing
fluid tube assembly (19).
5. Remove gun handle screws (9), gun handle (14),
trigger lock (15), ball (2) and spring (7).
6. Remove seal retainer (27), seal (3) and o-rings (5
and 6).
21
E
4
F
CAUTION
309495 7
ti13868a