Address Space - Siemens DI 8x24VAC/48VUC BA Manual

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image input.
Configuration options of DI 8x24VAC/48VUC BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure
the module using a GSD file, the configurations are available under various short
designations/module names; see the table below. The following configurations are possible:
Table 4- 2 Configuration options with GSD file
Configuration
1 x 8-channel without value status DI 8x24VAC/48VUC BA
Address space of the digital input module DI 8x24VAC/48VUC BA
The figure below shows the assignment of the address space for DI 8x24VAC/48VUC BA.
Figure 4-1
Digital input module DI 8x24VAC/48VUC BA (6ES7131-6CF00-0AU0)
Manual, 07/2018, A5E42285997-AA
Short designation/module
name in the GSD file
Address space of the digital input module DI 8x24VAC/48VUC BA
Parameter assignment/addressing
Configuration software, e.g. with STEP 7 (TIA Portal)
Integrated in GSD file
hardware catalog PROFINET IO
STEP 7
as of V15 with
HSP 0254
4.3 Address space
GSD file
PROFIBUS DP
X X
17