Table of Contents
Advertisement
Product overview
2.1 Properties
Note
Replace the fuse
1. Remove the module from the station.
2. Insert a screwdriver into the slotted top face of the fuse holder.
3. Lift out the fuse holder.
4. Replace the fuse.
5. Slide the fuse holder back into the module.
Properties
The module has the following technical properties:
● 8 digital inputs
● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,
type 1
The module supports the following functions:
Table 2- 1
Version dependencies of the functions
Function
Identification data
I&M0 to I&M3
Configuration in RUN
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
You can find additional information on the accessories in the ET 200SP Distributed I/O
System (https://support.industry.siemens.com/cs/ww/en/view/58649293) system manual.
12
HW version FW version
FS01
V0.0.0 and
higher
FS01
V0.0.0 and
higher
STEP 7
TIA Portal
V5.x
as of V15 with
as of V5.5 SP3
HSP 0254
with HSP 0229
V8.0
as of V15 with
as of V5.5 SP3
HSP 0254
with HSP 0229
V8.0
Digital input module DI 8x24VAC/48VUC BA (6ES7131-6CF00-0AU0)
GSD file
PROFINET IO
PROFIBUS DP
X
X
X
X
Manual, 07/2018, A5E42285997-AA
Advertisement
Table of Contents
