Sony MDS-PC2 Operating Instructions Manual page 9

1 ?/1 (power) switch (14, 22)
Press to turn the deck on. When you turn the deck on,
the ?/1 switch indicator on the deck turns off. When
you press the switch again, the deck turns off and the
indicator lights up red.
2 CLEAR button (27, 35)
Press to cancel the selection.
3 REC FADER button (38)
Press to perform Fade-in Recording or Fade-out
Recording.
4 PLAY MODE button (26)
Press to select Shuffle Play or Program Play.
5 Letter/number buttons (24, 34)
Press to enter a track number directly or input letters
or numbers.
6 MUSIC SYNC button (19)
Press to start Music Synchro-recording.
7 CD-SYNC STOP button (20)
Press to stop CD Synchro-recording.
CD-SYNC START button (20)
Press to start CD Synchro-recording.
CD-SYNC STANDBY button (20)
Press to enter standby for CD Synchro-recording.
8 ANALOG OUT LEVEL +/– buttons (23)
Press to adjust the output level from the LINE
(ANALOG) OUT jacks and PHONES jack.
9 X button (15, 22)
Press to pause play or recording. Press again to
resume play or recording.
q; x button (15, 22, 30)
Press to stop play, stop recording, or cancel the
selected operation.
qa REC LEVEL +/– buttons (16)
Press to adjust the recording level.
qs AyB button (25)
Press to select Repeat A-B Play.
qd REPEAT button (25)
Press to play tracks repeatedly.
qf m/M buttons (24, 26, 31, 35)
Press to locate a portion within a track, change the
contents of a program, or shift the cursor.
qg ./> buttons (14, 22, 26, 30, 39)
Press to locate tracks or select a menu item.
qh z button (15, 17, 18)
Press to record on the MD, monitor the input signal, or
mark track numbers.
qj T.REC button (19)
Press during recording pause to start Time Machine
Recording.
qk H button (15, 22)
Press to start play.
ql INPUT button (14)
Press to select the input jack (or connector) of the
program source to be recorded.
w; NAME button (34)
Press to add the name or change the name of a track or
MD.
CHAR button (34)
Press to select the type of characters to be input when
naming a track or MD.
wa DISPLAY button (11, 16, 26)
Press to select the information to be displayed in the
window.
SCROLL button (12)
Press to scroll the name of a track or MD.
ws MENU/NO button (14, 26, 30, 39)
Press to display "Edit Menu" or "Setup Menu."
YES button (14, 26, 30, 39)
Press to carry out the selected operation.
wd EJECT Z button (15, 22)
Press to eject the MD.
9 GB