Sony MDS-PC2 Operating Instructions Manual page 35

4
Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be
changed flashes, press CLEAR to erase the character,
then repeat steps 2 and 3.
To erase a character
Press m/M repeatedly until the character to be
erased flashes, then press CLEAR.
To enter a space
Press M while the cursor is flashing.
5
Press NAME.
The whole name appears in the display.
To cancel the operation
Press MENU/NO or x.
z You can use Edit Menu to name a track or the MD
1 While the deck is stopped, playing, or paused, press MENU/
NO to display "Edit Menu."
2 Press ./> repeatedly until "Name ?" appears, and then
press YES.
While the deck is recording, a flashing cursor appears in the
display and you can enter a name for the track currently being
recorded. In this case, go to step 6.
3 Press ./> repeatedly until "Nm In ?" appears, and then
press YES.
4 Press ./> repeatedly until the number of the track (when
naming a track) or "Disc" (when naming the MD) flashes, then
press YES.
5 Press YES again to flash cursor.
6 Repeat steps 2 to 5 (page 34 and this page) of "Naming a track
or MD."
The whole name appears in the display.
z
You can undo the naming of a track or MD
For details, see "Undoing the Last Edit" on page 37.
Copying a track or disc name
You can copy an existing track or disc name and use it to
name another track on the same disc or the disc itself.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display.
2
Press ./> repeatedly until "Name ?" appears,
then press YES.
3
Press ./> repeatedly until "Nm Copy ?"
appears, then press YES.
4
Press ./> repeatedly until the number of the
track (when copying the track name) or "Disc"
(when copying the disc name) flashes, then press
YES to copy the selected name.
When "No Name" appears in the display
The selected track or disc has no name.
5
Press ./> repeatedly until the number of the
track (when naming a track) or "Disc" (when
naming a disc) flashes, then press YES to enter the
copied name.
"Complete!!" appears for a few seconds and the name
is copied.
To cancel the operation
Press MENU/NO or x.
z
When "Overwrite ??" appears in step 5 above
The track or the disc selected in step 5 already has a name. If you
wish to replace the name, press YES again while the indication
appears in the display.
z
You can undo the copying of a track or disc name
For details, see "Undoing the Last Edit" on page 37.
35 GB