Falling Asleep To Music (Sleep Timer); About The Control A1 Control System - Sony MDS-PC2 Operating Instructions Manual

Falling Asleep to Music
(Sleep Timer)
You can set the deck so that it turns off automatically after
60 minutes.
Z
MENU/NO
H
z
./>
.
m
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Press ./> repeatedly until "Sleep" appears in
the display, then press YES.
3
Press ./> repeatedly to select the setting,
then press YES.
To Select
Turn on Sleep Timer Sleep On
Turn off Sleep Timer Sleep Off (factory setting)
4
Press MENU/NO.
To turn off Sleep Timer
Repeat the procedure above, selecting "Sleep Off" in step
3.
` / 1
YES
– +
X
x
>
+
M
–
About the CONTROL A1
Control System

About the CONTROL A1 Control System

This MD deck is compatible with the Control A1 Control
System.
The CONTROL A1 Control System was designed to
simplify the operation of audio systems composed of
separate Sony components. Control A1 connections
provide a path for the transmission of control signals
which enable automatic operation and control features
usually associated with integrated systems.
Currently, CONTROL A1 connections between a Sony
MD deck, CD player, amplifier (receiver), and cassette
deck provide automatic function selection and synchro-
recording.
In the future the CONTROL A1 connection with work as
a multifunction bus allowing you to control various
functions for each component.
Note
The CONTROL A1II Control system is designed to maintain
upward compatibility as the Control System is upgraded to
handle new functions. In this case, however, old components
will not be compatible with the new function.
CONTROL A1 and CONTROL A1 compatibility
The CONTROL A1 control system has been updated to
the CONTROL A1 which is the standard system in
the Sony components. Components with CONTROL
A1 jacks are compatible with components with
CONTROL A1 , and can be connected to each other.
Basically, the majority of the functions available with
the CONTROL A1 control system will be available with
the CONTROL A1 control system.
However, when marking connections between
components with CONTROL A1 jacks and components
with CONTROL A1 jacks, the number of functions
that can be controlled may be limited depending on
the component. For detailed information, refer to the
operating instructions supplied with the component(s).
39 GB