Symbol PDT 8100 Series Supported Equipment Manual page 40

Terminal Setup
Synchronizing Configuration Files
Click to put a check in the Synchronize Configuration Files box to enable automatic
synchronization of configuration files on the terminal. When the terminal is cold booted,
its configuration files will be compared with the most recent on the PC. The terminal is
updated automatically if it does not have the latest revision.
Synchronizing Program Files
Click to put a check in the Synchronize Program Files box to enable automatic
synchronization of program files on the terminal. When the terminal is cold booted, its
program files will be compared with the most recent on the PC. The terminal is updated
automatically if it does not have the latest revision.
Automatic IP Address Assignment
An IP address does not need to be assigned to the terminal. The 8140 terminal can find
the airloader server automatically.
Creating New Groups
New groups, with different configurations, can be created by clicking on
Terminal/Group Manager
After the new group has been created, the group settings option becomes available for
change, as shown below.
2-30
, and then clicking the right mouse button as shown.
Supported Equipment Manual
• March, 2006