Bravia" Sync Features; What Is "Bravia" Sync; Preparing For The "Bravia" Sync - Sony HT-CT100 Operating Instructions Manual

"BRAVIA" Sync Features

What is "BRAVIA" Sync?

By connecting Sony components that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
• One-Touch Play: When you play back a
component such as a Blu-ray Disc/DVD player
(recorder), the system and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching TV,
you can select to output the sound from the TV
speaker or the speakers of the system.
• System Power Off: When you turn off the TV,
the system and the connected components are
also turned off simultaneously.
"BRAVIA" Sync is compatible with a Sony TV,
Blu-ray Disc/DVD player, AV amplifier, etc.,
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will
not operate in the following
cases:
• When you connect this system to a component
which is not correspond with the Control for
HDMI function.
• When you connect the system and components
using other than HDMI connection.
We recommend that you connect this system to
products featuring "BRAVIA" Sync.
Note
• Depending on the connected component, the Control
for HDMI function may not work. See the operating
instructions of the component.
Preparing for the
"BRAVIA" Sync
To use the "BRAVIA" Sync, set the Control for
HDMI function to on for the system and the
connected component.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the system and the connected
component can be set simultaneously by setting
the Control for HDMI function of the TV.
THEATER TV INPUT
TV BD
BD/DVD
TOP MENU MENU
JUMP PICTURE
1 2
4 5
7 8
0
CLEAR
DISPLAY
F
C, X, x, c,
G
f
RETURN/EXIT
TV CH - REPLAY ADVANCE
. <
m
TV
1
Make sure that the system is connected
to the TV and the connected
components (which should be
compatible with the Control for HDMI
function) using HDMI cables (not
supplied).
2
Turn on the system, the TV and the
connected components.
TV ?/1
?/1
AV ?/1
?/1
SYSTEM STANDBY
DVD SAT
Input
DMPORT
buttons
F1 F2
WIDE FAVORITE
GUIDE
3
SOUND
FIELD
6
LEVEL
MODE
9
AMP MENU
AMP
ENTER
MENU
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
g
MENU/HOME
TV CH +
< >
H M
X x
continued
21
US