Recording On An Md Manually; Manual Recording - Sony DHC-NX5MD Operating Instructions Manual

Notes
• The recorded "LP:" is a stamp which appears to
indicate that the MD cannot be played back when
you try to play the MD on system that does not
support MD LP mode. It does not appear for
systems that support MD LP mode.
• When set to "On", "LP:" is recorded as the track
name, so the number of characters that can be input
to an MD is reduced. In addition, when you copy a
track name with "LP:" added, "LP:" is
automatically added to the copied track name. If
you divide an "LP:" track using the Divide function,
"LP:" is also added to the latter track.
• MDs recorded in MD LP (LP2 or LP4) mode
should be played back on a system that supports
MD LP mode. These MDs cannot be played back
on other systems.
• Even if you press REC MODE during recording or
recording pause, you cannot change the recording
mode.
• Even if you press REC MODE repeatedly to select
MONO, the monitor signal during recording does
not become monaural.
Recording on an MD
manually

— Manual Recording

If you use a partially recorded MD, recording
starts after the recorded tracks.
2
?/1 (Power)
3 4
1
Insert a recordable MD.
2
Press one of the function buttons you
want to record (e.g., CD).
3
Press REC/REC IT.
The MD deck stands by for recording.
4
Press MD S.
Recording starts.
1
2
3
4
5
MD s
continued
31