Sony DHC-NX5MD Operating Instructions Manual page 21

1
Press CD to switch the function to CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of the DISC 1 – 5 to select a
CD.
4
Turn the jog dial until the desired track
appears.
To programme all the tracks on a CD at
once, turn the jog dial to select "AL".
Disc number
3
PROGRAM
Track number
5
Press ENTER.
The track is programmed. The step number
appears, followed by the number of the last
programmed track and the total playing time
of the programme.
3
PROGRAM
Last programmed track
6
To programme additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD H.
Programme Play starts.
All the tracks play in the order you selected.
Playing time of the
selected track
Total playing time
To cancel Programme Play
Press PLAY MODE repeatedly until
"PROGRAM" and "SHUFFLE" disappear.
To Press
Check the CHECK on the remote repeatedly
programme in stop mode. After the last track,
"Check End" appears.
Clear a track
CLEAR on the remote in stop
from the end
mode.
Clear a specific CHECK on the remote repeatedly
in stop mode until the number of
track
the track to be erased lights up,
then press CLEAR.
1Select the disc tray with a DISC
Add a track to
the programme 1 – 5 button.
in stop mode
2Select the track by turning the
jog dial.
3Press ENTER.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press CD H.
• "--.--" appears when the total CD programme time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Note
You cannot change PLAY MODE during Programme
Play.
21