Sony DHC-NX5MD Operating Instructions Manual page 25

3
Turn MD JOG until the desired track
number appears in the display.
Selected track
number
4
Press ENTER/YES.
The track is programmed.
The number of the last programmed track
appears, followed by the total playing time of
the programme.
Last programmed
track number
5
To programme additional tracks, repeat
steps 3 and 4.
6
Press MD H.
Programme Play starts.
All the tracks play in the order you selected.
Playing time of
the selected track
Total playing
time
To cancel Programme Play
Press PLAY MODE repeatedly until
"PROGRAM" and "SHUFFLE" disappear.
To Press
Check the CHECK on the remote repeatedly
programme in stop mode. After the last track,
"Check End" appears.
Clear a track CLEAR on the remote in stop
from the end mode.
Clear a specific CHECK on the remote repeatedly
track in stop mode until the number of
the track to be erased lights up,
then press CLEAR.
Select the track in stop mode by
Add a track to
turning MD JOG, then press
the programme
ENTER/YES.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD H.
• "---.--" appears when the total MD programme time
exceeds 1,000 minutes.
25