Recording A Whole Cd On An Md - Sony DHC-MD515 Operating Instructions Manual

To Do this
Press p.
Stop play
Press (P. Press again to
Pause
resume play.
Select a track Turn MULTI JOG clockwise (to
go forward) or
counterclockwise (to go back)
until you locate the desired
track.
Press 0 or ) during play
Find a point in
a track and release it at the desired
point. "OVER" appears when
reaching the end of the CD.
Select a CD • Press MD/CD 1 – 3. Play
starts soon after you press the
button.
• Press DISC SKIP repeatedly
so that the desired CD
indicator lights green. Press
(P to start playing the CD.
If you press the DISC SKIP
button during play, the CD
changes and play starts
automatically.
Press the CD 1 6 – CD 3 6
Remove or
exchange CD button of the CD you want to
remove.
Adjust the Turn VOLUME.
volume
Tips
• In step 4, you can start playing from any track.
1 Press DISC SKIP to select the desired CD.
2 Turn MULTI JOG until the desired track number
appears.
3 Press (P.
• The CD 1 6 – CD 3 6 indicators indicate the
following.
Green: The disc tray is selected or being played.
Orange: A CD is inserted on the disc tray.
• If there is no CD in the player, "CD NO DISC"
appears.
•You can change the brightness of the display. Each
time you press the DIMMER button, the
brightness changes as follows:
Bright n Dimmed n Dimmest
Notes
• Close the disc tray by pressing the CD 1 6 –
CD 3 6 button. If you push the disc tray with
your hands to close it, it may damage the system.
• Do not use a CD with tape, seal or paste on it. It
may damage the CD or system.
Recording a whole
CD on an MD
— CD-MD Synchro Recording
You can make a digital recording of a whole
CD on an MD. If you use an MD with tracks
already recorded on it, the MD deck
automatically locates the end of the recording
and starts the new recording from there. If
you want to erase recordings, see page 47.
This system has other recording methods as
well (see "Recording methods on this system"
on page 34). Select one of them according to
your needs.
To turn on the system, press POWER.
5
POWER
7 6
EDIT/NO
8
MD
MD 1 indicator
1
MD 6
TAPE
p
3 2 4
9
continued
13