Sony DHC-MD515 Operating Instructions Manual page 61

5
Turn MULTI JOG until the timer
number ("SET REC 1 ?" – "SET REC
3 ?") appears.
1 2 3
1 2 3
6
Press ENTER/YES.
The day of the week indication flashes.
"SUN" – "SAT": Select this to timer
record with the same setting on the same
day every week.
"ALL": Select this to timer record with
the same setting every day.
ON
1 2 3
1 2 3
7
Set the time to start recording.
Turn MULTI JOG to set the day of the
week, then press ENTER/YES.
The hour indication flashes.
ON TU
1 2 3
1 2 3
Turn MULTI JOG to set the hour, then
press ENTER/YES.
The minute indication flashes.
ON TU
1 2 3
1 2 3
Turn MULTI JOG to set the minute, then
press ENTER/YES.
The day of the week indication flashes
again.
8
Set the time to stop recording
following the procedure in step 7.
SE T R C E 1
REC1
TUNED STEREO
S U N : O O A O
REC1
TUNED STEREO
E O : O O AM
REC1
TUNED STEREO
E 1 1 : O O PM
PRESET
REC1
TUNED STEREO
9
Turn MULTI JOG to select the MD
you want to record on.
As you turn the MULTI JOG, the display
changes as follows:
?
MD 1 ˜ MD 2 ˜ MD 3 ˜ MDALL
PRESET
When you want to record on two or
three MDs sequentially, select
"MDALL."
* When recording on a tape of the
optional TC-TX515 deck, select
"TAPE."
10
Press ENTER/YES.
The timer number, followed by the start
time, the stop time, music source and the
recording component appears, then the
M
original display appears.
PRESET
11
Press POWER to turn off the system.
To change the setting
Start over from step 1.
If you make a mistake, press EDIT/NO
repeatedly to go back to the setting you want
to change, then set it again.
To turn on or off the timer
PRESET
1 Press CLOCK/TIMER SELECT, turn
MULTI JOG until "SELECT REC ?"
appears, then press ENTER/YES.
The timer number in which you have
stored a setting (REC 1 – 3) appears.
2 Turn MULTI JOG to select "ON" or "OFF,"
then press ENTER/YES.
Each time you press the ENTER/YES
button, the timer numbers in which you
have stored the settings appear in order.
Turn on or off each timer setting.
The display shows the timer numbers and
their settings you turned on, then returns
to the original indication.
n TAPE* N
continued
61