Undoing The Last Edit - Sony DHC-MD333 Primary Operating Instructions Manual

1
Press MD + or = repeatedly
until the first track number to be
combined appears.
For example, to combine tracks 4 and 1,
select track 4.
2
Press EDIT then press +/–
repeatedly until "Combine ?"
appears.
3
Press ENTER/YES.
MD
TOC EDIT
4 5 4 +
The number of the first track
4
Press MD + or = repeatedly
until the second track number of the
two to be combined appears.
MD
TOC EDIT
4 1 3 +
The second track
number of the
two to be
combined
5
Press ENTER/YES again to combine
the tracks.
"Complete" appears for a few seconds
and the tracks are combined. Play starts.
To cancel combining
Press EDIT.
Notes
• If both of the combined tracks have track titles, the
title of the second track is erased.
• If "Impossible" appears, the tracks cannot be
combined. This happens when you've edited the
same track too many times. This is due to a
technical limitation of the MD system and is not a
mechanical error.
LEVEL SYNC -
DBFB
TRACK
LEVEL SYNC -
TRACK DBFB
New track number
Undoing the last
edit
–– Undo Function
This function lets you cancel the last edit and
restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit
if you do any of the following after the edit :
• Press the r REC or CD-MD SYNC button
on the MD deck.
• Update the TOC by turning the power off
or ejecting the MD.
• Disconnect the mains lead.
1
2,3
1
While the deck is stopped with no
track number appearing in the
display, press EDIT then press +/–
repeatedly until "Undo ?" appears.
"Undo ?" does not appear if you have
not done any previous editing.
continued
43