Combining Recorded Tracks - Sony DHC-MD333 Primary Operating Instructions Manual

Dividing recorded tracks
(continued)
3
Press ENTER/YES.
"Rehearsal" and "Position ok ?"appear
alternately and the portion to be divided
is played repeatedly.
To shift the division point :
While monitoring the sound,
press +/– to find the division point.The
point moves in increments of 1/86
second (1 frame).
4
Press ENTER/YES again when you
find the point where you want to
divide the track.
"Complete" appears for a few seconds
and the newly created track begins
playing.
To cancel dividing.
Press EDIT.
Notes
• If you divide a labelled track (page 37) into two
tracks, only the first track is labelled with the title.
Eg.
1 2
Adajo
Andante
1 2
Adajo
Andante
The letter track will have no title.
• The track cannot be divided at the beginning or
end. If these points are designated, "Impossible"
appears. Press +/– to change the position.
42
3 4
Allegro
3 4 5
Allegro
Combining
recorded tracks
–– Combine Function
You can combine 2 tracks into a single track.
The total number of tracks decreases by one
and all tracks following the combined ones
are renumbered.
Eg.: Combining tracks 1 and 3.
Track
number
1 2
Original
A
tracks
1
COMBINE
A
Eg.: Combining tarcks 4 and 1.
1
Original
A
tracks
1 2
COMBINE
B
1,4
2
3,5
3 4
C
B D
Combine tracks A and C.
2 3
C B
D
2 3 4
C
B D
3
A
C D
MD p
5
4