Recording From The Radio - Sony DHC-MD333 Primary Operating Instructions Manual

Recording from the
radio
You can record a radio programme on an
MD. If you use an MD with tracks already
recorded on it, the MD deck automatically
locates the end of the recorded section of the
MD and starts the new recording from there.
To record after erasing all tracks on an MD,
see page 39.
To turn on the system, press
MD indicator
1
2 5 4
3
1
Insert a recordable MD.
With the
arrow pointing
toward the
deck.
With the
label side up
and the
shutter slide
rightward.
2
Press TUNER/BAND (or BAND on
the remote) repeatedly until the
band you want appears.
3
Press TUNING MODE repeatedly
until "PRESET" appears.
.
6
MD p
MD 6
4
Press TUNING + or – (or PRESET
+ or – on the remote) to select the
desired station's preset number.
MD
F M 8 . 7
Frequency or the
preset station name*
or RDS station**
* The titles you entered appear
sequentially (see "Labelling the preset
station" on page 45).
** European model only.
5
Press r REC.
The MD stands by for recording and
REC button is lit red.
6
Press MD ·∏ (or MD · or
MD P on the remote).
Recording starts.
To stop recording
Press MD p.
To record non-preset radio
stations
To record non-preset stations, press
TUNING MODE repeatedly until
"MANUAL" appears in step 3, then press
TUNING + or – to tune in the desired station.
Tip
If noise is heard while recording an AM radio
station, reorient the AM loop aerial to reduce the
noise.
LEVEL SYNC -
DBFB
PRESET
5 M H z 1
The
preset
number
continued
17