Hooking Up The Optional Components - Sony CMT-C7NT Operating Instructions Manual

Hooking up the optional components

(continued)
To
Listen to the
connected digital
component
Record from a
connected digital
component to an MD
Record from a
connected digital
component to a tape
deck.
Listen to the
connected tape deck
Record from the tape
deck to an MD
Listen with
headphones.
Listening to the audio
from the connected
personal computer
Operate the system
from a personal
computer
50
Do This
Press FUNCTION repeatedly
until "OPTICAL IN" appears
in the display.
Press FUNCTION repeatedly
until "OPTICAL IN" appears
in the display.
Load a recordable MD, and
then start playing the digital
component.
Press REC/REC IT to place
the unit into recording
standby, and then press u at
the point where you want to
start recording.
To stop recording, press x.
While listening to the digital
component, start recording on
the tape deck.
Press FUNCTION repeatedly
until "TAPE" appears in the
display.
Press FUNCTION repeatedly
until "TAPE" appears in the
display.
Load a recordable MD, and
then start playing the tape on
the tape deck.
Press REC/REC IT to place
the unit into recording
standby, and then press u at
the point where you want to
start recording.
To stop recording, press x.
Connect headphones
(optional) to the PHONES
jack.
See page 52.
See pages 52 and 53.
Tips
• You can adjust the recording level after pressing
REC/REC IT (see page 26).
• You can record from a connected component with
the Smart Space function, Auto Cut function (see
page 25), and Time Machine recording function
(see page 21) operating.
• Thanks to the built-in sampling rate converter, you
can make a digital-to-digital recording to an MD
from a connected digital component with a
sampling frequency of 32 kHz, 44.1 kHz, or
48 kHz.
Note
Be sure to insert the plugs firmly, pushing them in all
the way. No sound will be produced if the plugs are
not inserted securely.