Releasing Group Tracks; Release Function - Sony CMT-C7NT Operating Instructions Manual

7
Press ENTER/YES on the remote to
enter the selected track.
8
Press . or > on the remote
repeatedly to select the last track (of
the series of tracks) to be registered.
The selected track number flashes and the
deck starts to play the track for your
confirmation.
9
Press ENTER/YES on the remote to
enter the selected track.
The deck starts to play the last registered
group track.
To create a new group with no
tracks
In step 6, press . or > on the remote
until "None" appears, and then press ENTER/
YES.
To register a single track
In step 7, press ENTER/YES on the remote
twice.
Notes
• You cannot register the same track to two or more
groups.
• When there are no more non-group tracks on the
MD, "Assign None" appears after step 5.
• A newly created group must be labeled if no non-
group tracks has been registered to it.
• If you do not label the group in step 5, the group
will be labeled with the default title (e.g., Group3)

Releasing group tracks

— Release Function

You can cancel the registration of tracks in one
group or all groups at once. (Note that the
tracks themselves in the selected groups will
not be erased.)
Releasing group tracks by
group
1
Press FUNCTION on the remote
repeatedly until "MD" appears in the
display.
2
Press GROUP ON/OFF on the remote in
stop mode.
"GROUP" lights up.
3
Press GROUP SKIP on the remote
repeatedly until the group you want to
release appears.
4
Press MENU/NO on the remote.
"Edit Menu" flashes.
5
Press . or > on the remote
repeatedly until "Gp Release?"
appears, and then press ENTER/YES on
the remote.
"REL" and the selected group number (e.g.
"Gp 3") appear.
6
Press ENTER/YES on the remote.
continued
33