Ricoh P800 User Manual page 122

5. Troubleshooting
Message
"Collate: Page max."
"Excd Prt Vol Use max count."
"File System Error."
"HDD is full."
"HDD not installed."
"I/O buffer overflow."
120
Cause
The amount of free memory is
insufficient to perform collating.
Printing was canceled because
the print maximum number was
reached.
Maximum number of user codes
that can be registered has been
reached.
PDF direct printing could not be
performed because the file
system could not be obtained.
The hard disk became full while
printing a Sample Print, Locked
Print, Hold Print, or Stored Print
file. Delete unnecessary files
stored in the machine.
The printer received a stored
job file but no hard disk is
installed.
An input buffer overflow
occurred.
Solution and reference
Reduce the number of pages to
be printed.
See "Specifying Maximum Print
Volume Use of Each User", User
Guide (Full Version).
Delete unnecessary user codes.
Turn the machine off, and then
turn it on again. If the message
appears again, consult your
service representative.
Reduce the data size of the
Sample Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the
PostScript 3 printer driver, the
hard disk capacity for fonts and
forms has been exceeded.
Delete unnecessary forms or
fonts registered to the machine.
Consult your sales or service
representative.
• Select [Font Priority] for
[Memory Usage] in
[System].
• In [I/O Buffer] under the
[Host Interface] menu, set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the machine.