Using An S-Air Product - Sony BDV-IS1000 Operating Instructions Manual

Using an S-AIR Product

The unit is compatible with the S-AIR function
(page 153), which allows sound transmission
between S-AIR products.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main unit. (The number of usable
S-AIR main unit depends on the use
environment.)
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
– S-AIR receiver: You can enjoy system
sound in another room.
Room A
S-AIR sub unit
(surround amplifier)
Room B
Note
• You cannot operate this function if you do not insert
the wireless transceiver in the unit correctly
(page 54).
S-AIR main unit
HDMI S-AIR
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Press "/1.
The system turns on.
2
Press HOME.
The home menu appears on the TV screen.
3
Press C/c to select
4
Press X/x to select [System Settings],
then press .
5
Press X/x to select [S-AIR ID], then
press .
6
Press X/x to select the desired ID, then
press .
You can select any ID (A, B, or C).
The confirmation display appears, then
disappears automatically.
7
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
S-AIR main unit
(This unit)
HDMI S-AIR
ID A
S-AIR sub unit
[Setup].
ID A
ID A
S-AIR sub unit
89
US