Sony BDV-IS1000 Operating Instructions Manual page 126

Symptom
A disc does not start playing
from the beginning.
The system starts playing the
disc automatically.
Playback stops automatically.
You cannot perform some
functions such as stop or search.
Messages do not appear on the
TV screen in the language you
want.
The language for the soundtrack/
subtitle or angles cannot be
changed.
The disc tray does not open and
you cannot remove the disc even
after you press A.
A disc cannot be ejected and
"LOCKED" appears in the front
panel display.
The system does not work
normally.
The Control for HDMI function
does not work.
No sound is output from the
system and TV while using the
System Audio Control function.
The external memory is not
recognized.
126
US
Remedy
• Resume Play has been selected.
Press OPTIONS and select [Play from Beginning], then press
• The title or BD/DVD menu automatically appears on the TV screen.
• The BD/DVD features an auto playback function.
• Some discs may contain an auto pause signal. While playing such a disc, the
system stops playback at the auto pause signal.
• Depending on the disc, you may not be able to perform some of the operations
above. Refer to the operating instructions supplied with the disc.
• In the Setup Display, select the desired language for the on-screen display in
[OSD] in [System Settings] (page 116).
• Try using the BD's or DVD's menu instead of the direct selection button on the
remote (page 69).
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
DVD being played.
• The BD or DVD prohibits the changing of the language for the sound track/
subtitle or angles.
• Try the following: 1 Press and hold VOLUME – and A on the unit for more
than 5 seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC
power cord (mains lead) from the wall outlet (mains), then reconnect after
several minutes.
• Contact your Sony dealer or local authorized Sony service facility.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• When "HDMI" does not light up in the front panel display, check the HDMI
connection (page 48).
• Set [Control for HDMI] in [HDMI Settings] to [On] (page 114).
• Make sure that the connected component is compatible with the [Control for
HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI
Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On]
(page 114).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 95).
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 95).
• Try the following: 1 Turn the system off. 2 Align the V mark of the
EXTERNAL slot with the V mark on the external memory, and insert the
external memory (page 55). 3 Turn the system on. 4 Check that the
EXTERNAL indicator lights up in the front panel display.
.