Step 6: Enjoying Sound By Each Function - Sony BDV-IS1000 Operating Instructions Manual

Step 6: Enjoying Sound
by Each Function
You can enjoy BD/DVD, TV, Set-top box/
digital satellite receiver, or VCR sound from all
the speakers in this system.
1 2
4 5
7 8
0
FUNCTION
DECODING
MODE
With the cover opened.
1
Press FUNCTION repeatedly until the
desired function appears in the front
panel display.
Each time you press FUNCTION, the
function changes as follows.
"BD/DVD" t "TUNER FM" t
"TUNER AM" t "TV" t "SAT/
CABLE" t "HDMI1" t "HDMI2" t
"DMPORT" t ...
Function
"BD/DVD"
"TUNER FM"/
"TUNER AM"
"TV"
"SAT/CABLE"
64
US
3
6
9
Source
Disc that is played by the
system
FM/AM radio (page 83)
TV
Component that is
connected to the SAT/
CABLE jacks on the rear
panel (page 50)
Function
"HDMI1"/"HDMI2" Component that is
"DMPORT"
Note
• When you use both the TV (AUDIO IN) jacks
(analog connection) and DIGITAL IN (TV) jack
(digital connection), or SAT/CABLE (AUDIO
IN) jacks (analog connection) and DIGITAL IN
(SAT/CABLE) jacks (digital connection) at the
same time, the digital connection takes priority.
2
Press DECODING MODE repeatedly
until the decoding mode you want
appears in the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the "PRO LOGIC,"
"PLII MOVIE," or "PLII MUSIC"
decoding mode.
For details, see page 77.
Note
• Depending on your TV, you may need to turn off your
TV's speaker to enjoy surround sound of the system.
Tip
• When listening to MP3 files or other compressed
music using the DIGITAL MEDIA PORT adapter,
you can enhance the sound.
Press DECODING MODE repeatedly until "A.F.D.
STD" appears in the front panel display (page 77) and
set the sound mode (page 80) to "MOVIE,"
"MUSIC," or "NEWS."
To cancel, select other than "A.F.D. STD."
• When using the additional surround amplifier
(optional) with the surround back speakers (optional),
you can select "PLIIx MOVIE" and "PLIIx MUSIC"
for the decoding mode (page 77).
If distortion occurs in the sound
of a connected component
You can reduce the input level for the connected
component. For details, see [Attenuate - TV]
(page 111) and [Attenuate - SAT/CABLE]
(page 111).
Source
connected to the HDMI1
or 2 jack on the rear panel
(page 50)
DIGITAL MEDIA
PORT adapter (page 88)