Sony BDV-IS1000 Operating Instructions Manual page 24

Center speaker
1
Remove the cover from the speaker.
Pry up the cover by inserting a thin, flat object into the slit in the cover. To replace the cover, see
Step 3. Be sure not to lose the cover.
Slit
Note
• When assembling, take care not to touch the speaker units.
2
Connect the speaker cords to the speaker.
Use the speaker cords (green). Be sure to match the speaker cords to the appropriate terminals on
the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube
to #. Do not catch the speaker cord insulation in the speaker terminals.
Connector (green)
Note
• When assembling, take care not to touch the speaker units.
24
US
Cover
,
Color tube (green)
Center speaker
Center speaker
3
#
Check the polarity on the label.