Covert Solution; Setup; Vibrate; Setting Default Vibrate - Motorola ST7000 Feature User Manual

MN002958A01-AF
Chapter 4: Main Menu
2 Select Security → DMO SCK.
The screen displays the status of the DMO Static Cipher Key.
4.10.4

Covert Solution

Covert Solution is a paid feature. This feature enables you to completely shut down all visible and
audible alerts and notifications, making the radio unnoticeable even in a silent and dark environment.
The Covert Solution is only available through One-touch button.
All audio activities are suppressed to the built-in speaker and microphone, and the audio is routed to
and from the accessory only. If there is no accessory connected, the audio is routed to the small
earpiece on the radio.
When the Covert Solution is turned on:
• The screen is disabled.
• All buttons are disabled except for the following buttons:
- PTT
- Emergency
- Covert Solution One-touch button (to exit Covert Solution)
• The LED indicator is disabled.
When the Covert Solution is turned off, the following settings remain:
• Volume
• TXI
• Emergency
4.11

Setup

This sub-menu allows you to change your radio configuration.
4.11.1

Vibrate

This sub-menu allows you to determine if your radio vibrates, or rings, or vibrates and then rings when
receiving a call.
NOTICE: The vibration when pressing the capacitive Touch User Interface, known as Haptic
Feedback, is enabled by default and not controlled by this menu.
4.11.1.1

Setting Default Vibrate

Procedure:
1 From the home screen, press the Menu/OK key.
2 Select Setup → Vibrate.
3 Select one of the following options:
• Vibe then Ring
• Vibe Only
70