Charging The Battery; Battery Charging Indications - Motorola ST7000 Feature User Manual

The battery pops up.
2 Lift out the battery.
2.2.8

Charging the Battery

You can charge a battery separately or attached to a radio.
IMPORTANT:
Use only Motorola Solutions approved-chargers which provide optimal performance. Using
other chargers may fail to fully charge, or reduce the life of the battery.
Do not charge the battery in a hazardous area.
Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to an appropriate power source, according to the specification of the
charger.
2 Perform one of the following actions:
• Desktop chargers – insert the battery or the radio with the battery attached into the
appropriate socket of the charger. Ensure that the battery/radio made good connection with
the charger. If the battery is inserted, the LED on the charger illuminates indicating that
charging is in progress. If the radio with the battery attached is inserted, the Charge Indicator
LED on the radio illuminates instead.
• Travel chargers – connect the charger to the radio with the battery attached. Ensure that the
charger is firmly connected to the radio and that the radio display is indicating that charging is
in progress.
NOTICE:
If a multi-unit charger LED indicates an error (blinking red light) when radio is inserted
and being charged, re-insert the radio. If the light is still red after several reconnections to
MUC, the battery may be damaged or reached its end of life.
Postrequisites: The battery may heat up during charging. After charging, make sure that the battery
and the radio are within the operating temperature range before using the radio.
2.2.9

Battery Charging Indications

When the radio is turned off while charging, it displays the Charger Mode screen. The screen displays
the charging progress expressed in percentage.
MN002958A01-AF
Chapter 2: Getting Started
23