Alert Codes - Fisher & Paykel OR90SCG2 User Manual

If there is a problem with the oven, the cooker will:
automatically suspend all oven functions
beep five times
display an alert code.
IMPORTANT!
Do not turn off the mains power supply to the cooker (wall switch) if you get an alert
code, unless the instructions in the chart following specifically instruct you to. There
are cooling fans within the cooker which are needed to cool the cooker components.
Turning off the power while the cooker is too hot may damage the cooker and its
surrounding cabinetry.
What to do if an alert code is displayed
1 If the beeping hasn't stopped already, touch any control to stop it.
2 Make a note of the alert code displayed. You may need this information.
3 Check the chart following to see if you can fix the problem yourself and follow
the instructions.
4 If you can fix the problem and the alert code does not reappear, you can keep
using your oven.
OR
If you can't fix the problem yourself or the alert code reappears and the problem persists:
wait until the cooling fans have stopped and the oven has completely cooled down, then
turn the power to the cooker off at the wall and call your Authorised Repairer or Customer
Care with the alert code information.
ALERT CODE
A1
F
+ number

ALERT CODES

POSSIBLE CAUSES
The oven has overheated.
Technical fault.
WHAT TO DO
1 Allow the oven to cool down.
2 Once the oven has cooled down
and the door has unlocked, the alert
code will disappear. You can now use
the oven again.
1 Note down the alert code.
2 Wait until the cooling fans
have stopped and the oven has
completely cooled down.
3 Turn the power to the oven
off at the wall.
4 Call your Authorised Repairer
or Customer Care with the alert
code information.
71