Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gigabyte GA-SBC4100
Summary of Contents for Gigabyte GA-SBC4100
- Page 1 GA-SBC4100 User's Manual Rev. 1001 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
- Page 2 Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.
-
Page 3: Table Of Contents
Table of Contents GA-SBC4100 Motherboard Layout ..................4 Box Contents ........................4 Chapter 1 Hardware Installation ..................5 Installation Precautions ..................5 1-2 Product Specifications ..................6 Installing the Memory ..................8 Installing an Expansion Card ................8 Back Panel Connectors ..................9 Internal Connectors ..................10 Chapter 2 BIOS Setup ....................20... -
Page 4: Ga-Sbc4100 Motherboard Layout
GA-SBC4100 Motherboard Layout DDR4_1 SPKR_CTRL LCD_VCC SYS_FAN DDR4_2 MON_SW RUSB30 GA-SBC4100 Intel Gemini Lake SoC N4100 ® (Note) M_BIOS CLR_CMOS LAN2 Realtek ® LAN1 SATA_PWR Realtek ® ® HP_MIC Super I/O (Note) LVDS CODEC DCIN_PWR F_PANEL COMA COMB COMC COMD... -
Page 5: Chapter 1 Hardware Installation
Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. •... -
Page 6: Product Specifications
2 x DDR4 SO-DIMM socket supporting up to 16 GB of system memory Š Support for DDR4 2400/2133 MHz memory modules Š (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Integrated in the SoC: Š... - Page 7 Š * G IGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. Please visit GIGABYTE's website Please visit the Support\Utility List for support lists of CPU, memory page on GIGABYTE's website to modules, SSDs, and M.2 devices. download the latest version of apps. - 7 -...
-
Page 8: Installing The Memory
• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) • Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage. -
Page 9: Back Panel Connectors
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Please visit GIGABYTE's website for details on configuring the audio software. - 9 -... -
Page 10: Internal Connectors
Internal Connectors 8 20 DCIN_PWR MON_SW SYS_FAN SPEAKER SATA3 SPKR_CTRL SATA_PWR F_USB1/F_USB2 COMA/COMB COMC/COMD F_PANEL COMA/B/C/D_PW GPIO CLR_CMOS LVDS SMBUS LCD_VCC Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •... - Page 11 1) DCIN_PWR (DC Power Connector, Input 9V ~ 36V) Pin No. Definition DC IN DC IN 2) SYS_FAN (Fan Header) The fan header on this motherboard is 4-pin. The fan header possesses a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire).
- Page 12 3) SATA3 (SATA 6Gb/s Connector) The SATA connector conforms to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. Pin No. Definition 4) SATA_PWR (SATA Power Connector) The connector provides power to installed SATA devices. Pin No.
- Page 13 5) M2 (M.2 Socket 3 Connector) The M.2 connector supports M.2 PCIe SSDs. Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Use a screw driver to unfasten the screw and standoff from the motherboard. Step 2: Slide the M.2 SSD into the connector at an angle.
- Page 14 7) F_PANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. • PLED (Power LED, Yellow): Power Switch Power LED Connects to the power status indicator on the System Status LED...
- Page 15 9) LVDS (LVDS Header) LVDS stands for Low-voltage differential signaling, which uses high-speed analog circuit techniques to provide multigigabit data transfers on copper interconnects and is a generic interface standard for high- speed data transmission. Pin No. Definition Pin No. Definition Pin No.
- Page 16 11) FPD (Flat Panel Display Header) The FPD is a high-speed interface connecting the output of a video controller in a laptop computer, computer monitor or LCD television set to the display panel. Most laptops, LCD computer monitors and LCD TVs use this interface internally. The header conforms to FPD specification.
- Page 17 14) SPKR_CTRL (Volume Control Header) The header connects to the volume control button of the monitor to control the volume. This feature requires a software update to be enabled. Pin No. Definition VOL_DW VOL_UP 15) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No.
- Page 18 16) COMA/COMB (Serial Port Headers) Each COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. For RS232 Devices: Pin No. Definition NDCD- NDSR- NSIN NRTS- NSOUT NCTS- NDTR- 12V_5V 17) COMC/COMD (Serial Port Headers)
- Page 19 19) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values.
-
Page 20: Chapter 2 Bios Setup
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility. Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system. -
Page 21: Main
Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a submenu, press <F1>... -
Page 22: Advanced
Advanced Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced Main Security Boot Save & Exit OnBoard LAN Controller [Enabled] OnBoard LAN Controller#2 [Enabled] Soft-Off by PWR-BTTN [Instant-off] Primary Display [IGD] [Disabled] LVDS Support [Enabled] LVDS Panel Resolution [1280x768 6-bit] ` Trusted Computing ` IT8786 Super IO Configuration... - Page 23 ` IT8786 Super IO Configuration This section provides information on the super I/O chip and allows you to configure the parallel port. ` Hardware Monitor & CPU Temperature/System Temperature Displays current CPU/system temperature. & SYS_Fan Speed Displays current SOC/system fan speeds. & VCCGI/VDDQ/+12V/VCC Displays the current system voltages. ` SIO Misc Functions & AC BACK Determines the state of the system after the return of power from an AC power loss. The system returns to its last known awake state upon the return of the AC power.
- Page 24 & PXE boot wait time Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) & Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. (Default: 1) ` CSM Configuration & CSM Support Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process. Enables UEFI CSM.
- Page 25 & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) & USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) & USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed.
-
Page 26: Security
Security Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced Main Security Boot Save & Exit Password Description If ONLY the Administrator's password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the Administrator's password is set, is a power on password and must be entered to boot or enter Setup. -
Page 27: Boot
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On) & Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) &... - Page 28 & Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives, and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that presents the devices of the same type that are connected. This item is present only if at least one device for this type is installed.
-
Page 29: Save & Exit
2-6 Save & Exit Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Main Advanced Security Boot Save & Exit Save Options Save Changes and Exit Discard Changes and Exit Default Options Restore Defaults Boot Override gf: Select Screen hi: Select Item Enter: Select +/-: Change Opt. -
Page 30: Chapter 3 Appendix
• After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe." (Or go to My Computer, double-click the optical drive and execute the Run.exe program.) "Xpress Install" will automatically scan your system and then list all of the drivers that are recommended to install. You can click the Xpress Install button and "Xpress Install" will install all of the selected drivers. Or click the arrow icon to individually install the drivers you need. Please visit GIGABYTE's website for more troubleshooting information. - 30 -... -
Page 31: Regulatory Statements
Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE. - Page 32 FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 33: Contact Us
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw GIGABYTE eSupport • To submit a technical or non-technical (Sales/Marketing) question, please link to: https://esupport.gigabyte.com...