Page 1
GA-SBCAP3455 User's Manual Rev. 1001 For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
Page 2
The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.
Chapter 1 Hardware Installation Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the chassis is suitable for the motherboard. •...
1 x DDR3L SO-DIMM socket supporting up to 8 GB of system memory Support for DDR3L 1866/1600/1333 MHz memory module (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Integrated in the SoC: ...
Page 7
SBC Form Factor; 14.6cm x 10.2cm * G IGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. Please visit GIGABYTE's website Please visit the Support\Utility List for support lists of memory modules, page on GIGABYTE's website to and SSDs. download the latest version of apps. - 7 -...
• Make sure that the motherboard supports the memory. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) • Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
Page 9
HP MIC (Headphone and Microphone Combo Jack) This jack is for connecting a headphone or microphone. You can connect a microphone, headphone or speaker to this jack. Please visit GIGABYTE's website for more software information. • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.
Internal Connectors 18 19 SYS_FAN BL_SW SATA3 0/1 SATA_PWR1/SATA_PWR2 GPIO_PWRSEL LPT_GPIO F_PANEL LPT_SEL DCIN_PWR COMA/COMB F_USB1/F_USB2 COMC/COMD SPEAKER_CONTROL COMA/B/C/D_PW SPEAKER SMBUS 2W_SPKR LVDS MON_SW BIOS_SET LCD_VCC CLR_CMOS GPIO_SET USIM Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •...
Page 11
1) SYS_FAN (Fan Header) The fan header on this motherboard is 4-pin. The fan header possesses a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
Page 12
4) BAT/BAT_CON (Battery/Battery Power Cable Connector) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. You may clear the CMOS values by removing the battery cable: 1.
Page 13
6) DCIN_PWR (DC Power Connector, Input 9V ~ 36V) Pin No. Definition DC IN DC IN 7) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No. Definition Pin No. Definition Power (5V) USB DY+ Power (5V)
Page 14
10) 2W_SPKR (Speaker Header) This header provides a 2W (4ohm) speaker on your AIO chassis. Pin No. Definition SPK_LP SPK_LN 11) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed. This function requires a chassis with chassis intrusion detection design.
Page 15
14) G PIO_SET (GPIO Status Configuration Jumper) Use this jumper to set the GPIO status of the LPT_GPIO header to HIGH or LOW. 1-2 Close: Set to HIGH level (3V) (Default) 2-3 Close: Set to LOW level. 15) BL_SW (Backlight Switch) The backlight switch provides the function for screen backlight adjustment. Pin No.
Page 16
17) GPIO_PWRSEL (GPIO Power Selection Jumper) Move the jumper cap from the LPT_SEL jumper to this jumper to configure the LPT_GPIO header to support GPIO device and also to specify the GPIO voltage. 1-2 Close: Set GPIO voltage to +12V. 2-3 Close: Set GPIO voltage to 5V. 18) LPT_GPIO (LPT/GPIO Header) Use this header to connect a LPT or GPIO device. Refer to the descriptions of the LPT_SEL and GPIO_ PWRSEL jumpers for further configuration.
Page 17
20) COMA/COMB (Serial Port Headers) Each COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. Pin No. Definition Pin No. Definition NDCD- NCTS- NDSR- NDTR- NSIN 12V_5V NRTS- NSOUT 21) COMC/COMD (Serial Port Headers)
Page 18
23) SMBUS (System Management Bus Jumper) This header provides the SMBUS signals. Pin No. Definition SMB_CLK SMB_DATA 24) I2C (Inter-Integrated Circuit Jumper) This header provides the I2C signals. Pin No. Definition I2C_SCL I2C_SDA 25) LVDS (LVDS Header) LVDS stands for Low-voltage differential signaling, which uses high-speed analog circuit techniques to provide multigigabit data transfers on copper interconnects and is a generic interface standard for high- speed data transmission.
Page 19
26) BIOS_SET (BIOS Select Jumper) The jumper allows users to easily select a different BIOS for boot up. 1-2 Close: M_BIOS (Boot from the main BIOS) (Default) 2-3 Close: B_BIOS (Boot from the backup BIOS) 27) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS configuration and reset the CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Open: Normal Short: Clear CMOS Values •...
To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on. To upgrade the BIOS, use the GIGABYTE @BIOS utility, which is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet and updates the BIOS.
Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a submenu, press <F1>...
Advanced Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc. Advanced Security Boot Save & Exit Main OnBoard LAN Controller [Enabled] OnBoard LAN Controller#2 [Enabled] Soft-Off by PWR-BTTN [Instant-off] PCIE VGA Workaround [Disabled] [Disabled] LVDS Support [Enabled] LVDS Panel Resolution [1366x768 6-bit] ` Realtek PCIe GBE Family Controller (MAC:B4:2E:99:3B:76:8E)
Page 23
` Realtek PCIe GBE Family Controller This sub-menu provides information on LAN configuration and related configuration options. ` Trusted Computing Enables or disables Trusted Platform Module (TPM). ` IT8686 Super IO Configuration This section provides information on the super I/O chip and allows you to configure the parallel port. ` Hardware Monitor & CPU Temperature/System Temperature Displays current CPU/system temperature. & System Fan Speed Displays current system fan speeds. &...
Page 24
` CPU Configuration ` CPU Power Management & EIST Enables or disables Enhanced Intel Speed Step Technology (EIST). Depending on CPU loading, Intel ® ® EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. Auto lets the BIOS automatically configure this setting. (Default: Enabled) &...
Page 25
& Ipv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. & Ipv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. & PXE boot wait time Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is configurable only when Network Stack is enabled. (Default: 0) & Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. (Default: 1) ` CSM Configuration &...
Page 26
` USB Configuration & Onboard USB Feature Enables or disables the onboard USB function. (Default: Enabled) & Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support.
Security Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc. Advanced Security Boot Save & Exit Main Password Description If ONLY the Administrator's password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User's password is set, then this is a power on password and must be entered to boot or enter Setup.
Page 28
& Vendor Keys Displays the vendor keys. & Attempt Secure Boot Enables or disables the secure boot function. Secure Boot requires all the applications that are running during the booting process to be pre-signed with valid digital certificates. This way, the system knows all the files being loaded before Windows 8 loads and gets to the login screen have not been tampered with. (Default: Disabled) & Secure Boot Mode Allows you to configure the secure boot mode. (Default: Customized) ` Key Management This section provides you with configuration options for secure boot key management. - 28 -...
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On) & Full Screen LOGO Show Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) &...
Page 30
& VGA Support Allows you to select which type of operating system to boot. Enables legacy option ROM only. Auto EFI Driver Enables EFI option ROM. (Default) This item is configurable only when Fast Boot is set to Enabled. & USB Support All USB devices are disabled before the OS boot process completes. Disabled Full Initial All USB devices are functional in the operating system and during the POST.
Save & Exit Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc. Main Advanced Security Boot Save & Exit Save Options Save Changes and Exit Discard Changes and Exit Save Changes Discard Changes Default Options Restore Defaults Save as User Defaults Restore User Defaults gf: Select Screen Boot Override...
Chapter 3 Appendix Drivers Installation • Before installing the drivers, first install the operating system. • After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the screen and select "Run Run.exe."...
European Commission Delegated Directive (EU) 2015/863 Statement 2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas diretivas GIGABYTE products have not intended to add and safe from hazardous é verificada utilizando as normas europeias harmonizadas. substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).
Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan TEL: +886-2-8912-4000, FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw GIGABYTE eSupport • To submit a technical or non-technical (Sales/Marketing) question, please link to: https://esupport.gigabyte.com...