Kenmore 795.583*.410 Service Manual page 24

1-1. Display Function
1) When the appliance is plugged in, it is set to 37°F for refrigerator and 0°F for freezer. You can adjust the Refrigerator and
the Freezer control temperature by pressing the ADJUST button.
2) When the power initially applied or restored after a power failure, it is set to the previously controlled temperature.
Display
OFF Mode
1-2. °C/°F TOGGLE
The initial setting is F and the display temperature mode can be changed from °F to °C or °C to °F by pressing and holding the
FREEZER TEMP and the REFRIGERATOR TEMP keys at the same time for over 5 seconds
1-3. Demonstration Mode (OFF Mode)
)
1 Any Door must be opened to enter in this mode
)
2 To activate this mode press and hold ULTRA ICE and REFRIGERATOR TEMP button over 5 seconds
)
3 The display will show the word
)
4 In this mode all loads are turned off Compressor Heater Fans etc
)
5 Lamps and Dispenser Functions works normally even in demonstration mode the refrigerator Lamp automatic off function
)
works normally
)
6 To exit Demonstration mode open any Door then press and hold ULTRA ICE and REFRIGERATOR TEMP button over 5
(
seconds Display return to normal mode
Demo Mode
.
"
OFF".
( , ,
(
).
°C/°F
Toggle
, )
24
.
.