Kenmore 795.583*.410 Service Manual page 13

3. SMART DIAGNOSIS DISASSEMBLY
1. Open the refrigerator door. Then, remove the top hinge
cover screw.
2. Lift up the cover.
3. Disconnect the wire harnesses.
4. Release the smart diagnosis from the locks.
5. Finally, remove the smart diagnostic.
• Assemble
1. Place the smart diagnosis by inserting the PCB hole into
the guide 2.
2. Make sure that the PCB is corrrectly placed.
3. Connect the wire harness.
4. Place the top hinge cover.
5. Using a phillips screwdriver insert a screw in the top
hinge cover.
13