Kenmore 795.583*.410 Service Manual page 19

10. ICEMAKER DISASSEMBLY METHOD
Note :to disassemble the icemaker, separate Motor, AC from the
door first.
disassemble Ice bin and cover.
1
Cover
Ice bin
2 Separate the Motor,AC from the door.
Motor Cover
3 Remove the Three screws on the Motor,AC.
Screw
11. WATER TANK DISASSEMBLY METHOD
1) Hold the front of the Drawer and Pull it out completely.
Hold the front and pull it out the fresh
compartment and
pull it out until it gets blocked by the
hooking part.
When you cannot pull out the fresh
compartment any more,
lift it up slightly to pull it out completely
to the front side
(outer side.)
Harness
2) Hold the front of the Cover,TV and Pull it out completely.
3) Loosen 1 Screw on the Water Tank.
4) Pull the water supply, tube (1) is under the Freezer door and
(2) is on the water valve
① Under the Freezer Door
Pull the water supply tube (1) forward while pressing on the
coupling (2) as shown in the drawing.
5) Assembly is he reverse order of disassembly.
19
② on the Water vavle