Table of Contents
Advertisement
Commissioning information
Backward compatibility
The S4 Programming tool (S4-BASE-PROGRAM) and S4 Programming Base Interface for S4 Beam
sensor pair software is used to convert an S4 Beam Sensor pair to be compatible with the older type 34740
Beam sensor pair.
"
1. You will need to program BOTH S4 beam transmitter and S4 beam receiver for backward compatibility.
2. When installing a backward compatible S4 beam sensor pair to replace an existing 34740 beam sensor pair you will
also need to replace the brackets, use either S4-34741-01 (angle bracket) or S4-34741-03 (parallel bracket).
2. The monitored test input for test fire is NOT applicable on a S4 beam sensor pair that is made backward compatible.
3. The sensor working indicator function on the backward compatible S4 beam sensor pair is NOT applicable.
4. The Autogain function button on a backward compatible S4 beam sensor pair is NOT applicable, use
instead the Autogain function at the Control panel.
How to determine backward compatibility of S4-34740 Beam Sensor pair
Type 3 S4-34740 Beam Sensor pair
Before converting the S4-34740 beam
sensor pair (Type 3) to a backward
compatible beam sensor pair, check the
type of beam sensor build installed in your
system to ensure it is supported to
accept a backward compatible S4-34740.
How to connect the S4 Programming tool and how to fit a beam sensor to the tool
Computer with S4 Programming
base interface application
COMM port
INPUT
100-240V ~ / 180mA / 50 - 60Hz
OUTPUT 9V
Insert the correct plug (polarity does not matter)
16
9-way
D type
/ 670mA
Plug
+
-
RED LED
P
OR
B
EAM-TX
RED LED
O
RED LED
IR LED
Damage will occur if you fail to align
sensor markings to the markings on
the programming base
Programming base
Red ring
4188-968 issue 4_Part 2_07-12_S4 mains interface
S4 Beam Sensor & brackets
Supported
Type 2 Beam Sensor
pair build
With panel having
Local Controller Card &
Loop Processor Card:
£
BS version equal to or
greater than V3.40
£
EN version equal to or
greater than V4.00
Not Supported
Type 1 Beam Sensor
pair build
j
.
Beam Sensor
Advertisement
Table of Contents
