Table of Contents
Advertisement
CANADA ONLY
CHIMNEY INSTALLATION
INSTRUCTIONS USING SECURITY
CHIMNEYS ASHT
CANADA APPROVED VENTING SYSTEMS:
7" diameter chimney - Canada
& S2100 manufacture by Security Chimneys
Models ASHT
®
DuraTech Canada (DTC) manufactured by DuraVent only, including:
- Chimney lengths
- Elbows (where necessary)
- Associated components as per these installation instructions
and instructions provided by the venting Manufacturer
Reference the installation instructions provided by venting manufacturer.
CHIMNEY ADAPTOR-CANADA ONLY
The fireplace is normally supplied with a chimney adaptor suitable for
use with IHP SnapPak venting. In Canada, the use of Security Chimneys
ASHT adaptor is required (Security part number 7IHP1* or 7IHP2**).
* One inch wall
** Two inch wall
Chimney Adaptor -
Canada only
WRT4826WH Shown
Figure 40
CHIMNEY CHASE AND MULTIPLE TERMINATIONS
For the purpose of this manual, a chimney chase is considered a part of
the chimney system rather than part of a building. The termination must
be placed a minimum of 18" (460 mm) above the chase.
For installations where more than one chimney is located in the same
chase or within the same area, we suggest that their terminations be
separated by at least 16" (410 mm) horizontally, and 18" (460 mm) verti-
cally. This separation is to prevent smoke migrating from one chimney
or
®
to another (see Figure 41).
Figure 41
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
18" (460 mm)
18" (460 mm)
16" (410 mm)
16" (410 mm)
18" (460 mm)
25
Advertisement
Table of Contents
