9. How to set the machine head and to initialize data
(the factory-set state at the time of shipment)
❽ -
3) Data is initialized by pressing
* If you want to initialize the data, change the setting of the type of machine head to a different type, then
select the desired type of machine head.
Example) In the case the selected type of machine head is "2":
P70
Change the selected type of machine head from "2" to "3". Press
Change the selected type of machine head again from "3" to "2". Press
A
❷
❸
❸ . Then, the sewing machine returns to the normal sewing state.
– 41 –
1) Turn the power ON while keeping
❸ , or
❷ and
simultaneously. (This function is activated under
the service level.)
❽ to to select the function
2) Press
setting No. 70 (A).
3) Confirm the data with
and
4) Press
sponding machine head.
Set value = 2: DDL-7000AS-7
Set value = 3: DDL-7000AH-7
❷ or
❸ held pressed
❸ .
to select the corre-
❸ .
❸ .