Connecting With A Vcr Or 15K - Sony VPL-CS2 Operating Instructions Manual

When you use a PS/2 mouse port
Rear side
AUDIO MOUSE
Stereo audio connecting cable (not supplied)
To connect a Macintosh computer
Use an ADP-20 signal adapter (not supplied). In this case, however, you can
not control the mouse of the computer by the Remote Commander.
Connecting with a VCR or 15k RGB/Component Equipment
This section describes how to connect the projector to a VCR and 15k RGB/
component equipment.
For more information, refer to the instruction manuals of the equipment you
are connecting.
To connect a VCR
Rear side
AUDIO MOUSE
Stereo audio
connecting
cable (not
supplied)
18
GB
Connecting the Projector
VIDEO S VIDEO INPUT A
HD D-sub
15-pin cable
(supplied)
PS/2 Mouse cable (supplied)
VIDEO S VIDEO INPUT A
S-Video cable (not supplied)
Video cable
(not supplied)
to monitor output
to mouse port (PS/2)
to audio output
to video output
to audio output
Computer
to S video output
VCR