Remote Commander - Sony VPL-CS2 Operating Instructions Manual

Remote Commander

The keys that have the same names as those
on the control panel function identically.
You can control a connected computer using
the Remote Commander.
For details, see "To control the computer
using the supplied Remote Commander" on
page 23.
MUTING
+
PIC
VOLUME
–
INPUT
MENU
+
RESET
0
–
(D ZOOM)
D ZOOM
9
1
FUNCTION
1 I / 1 1 1 1 key
2 APA (Auto Pixel Alignment) key
3 ENTER key
4 Joystick
Functions as the mouse of the computer
connected to the unit.
I / 1
1
2
APA
ENTER
3
4
5
R
6
CLICK
2
7
8
5 Arrow keys (M M M M /m m m m /<
6 R CLICK key
Functions as the right button on a mouse.
7 FUNCTION 1, 2 keys
These keys function when the supplied
application software is used.
When you connect the projector with a
computer, you can open a file on the
screen by just pressing the FUNCTION
key. This will enhance your
presentation. To use this function,
allocate a file to the FUNCTION key by
using the application software.
For details, see the README file and
the HELP file supplied with the
application software.
8 CONTROL S OUT jack (stereo
minijack)
This does not function with this
projector.
9 RESET (D ZOOM) key
Resets the value of an item back to its
factory preset value or returns the
enlarged image back to its original size.
0 D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
+: Pressing the + key once highlights one
of the images divided into 16. Use an
arrow key (M/m/</,) to move the
highlight portion to the point in the
image to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
– –
: Pressing the key reduces an image
that has been enlarged with the D
ZOOM + key.
Location and Function of Controls
< /, , )
< < , ,
13
GB