Sony VPL-CS2 Operating Instructions Manual page 14

qa L CLICK key
Functions as the left button on a mouse.
qs MENU key
qd INPUT key
qf MUTING PIC key
Cut off the picture. Press again to
restore the picture.
qg VOLUME +/– keys
qh Infrared transmitter
14
GB
Location and Function of Controls
To install batteries
1
Push and slide to open the lid, then
install the two size AA (R6) batteries
(supplied) with the correct polarity.
Be sure to install
the battery from
#
the side.
2
Replace the lid.
Notes on batteries
• Make sure that the battery orientation is
correct when inserting batteries.
• Do not mix an old battery with a new one
or different types of batteries.
• If you do not use the Remote Commander
for a long time, remove the batteries to
avoid damage from battery leakage. If
batteries have leaked, remove them, wipe
and dry the battery compartment, and
replace the batteries with new ones.
Notes on Remote Commander
operation
• Make sure that nothing obstructs the
infrared beam between the Remote
Commander and the remote control
detector on the projector. Direct the
Remote Commander toward the front or
rear remote control detector.
• The operation range is limited. The shorter
the distance between the Remote
Commander and the projector is, the wider
the angle within which the commander can
control the projector becomes.