Sony VPL-CS2 Operating Instructions Manual page 10

qh RELEASE (adjuster adjustment)
qh
qh qh
button
For details, see "How to use the
adjuster" on page 10.
qj Connector panel
qj qj qj
For details, see "Connector Panel" on
page 12.
qk Security lock
qk qk qk
Connects to an optional security cable
(Kensington's).
The security lock corresponds to
Kensington's MicroSaver Security
System.
If you have any comment, contact:
Kensington
2853 Campus Drive
San Mates, CA 94403
U.S.A.
Tel: 800-535-4242: extension
3348
Home page address:
http://www.kensington.com/
ql Ventilation holes (intake)
ql ql ql
10
GB
Location and Function of Controls
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
1
Lift the projector and press the
RELEASE button.
The adjuster will extend from the
projector.
RELEASE button
2
While pressing the button, lower the
projector. Then, release the button.
The adjuster can be set at 6 positions.
Notes
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the
projector with the adjuster out.