Adjusting Colour Registration (Convergence); Introducing And Using The Menu System - Sony KP-41PX2 Instruction Manual

Adjusting Colour Registration (Convergence)

Due to the earth's magnetism, the picture might become undefined and you could see different colours on the outlines of
the images.
In that case, proceed as follows:

Introducing and Using the Menu system

Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
1
Press the MENU button to switch the first level menu on.
2
• To highlight the desired menu or option, press
• To enter the selected menu or option, press
• To return to the last menu or option, press
• To alter the settings of your selected option, press
• To confirm and store your selection, press OK.
3
Press the MENU button to remove the menu from the screen.
10
First Time Operation - Menu System
Auto converge the Red, Green, and
Blue Lines
1
Push up the flap on the front of the projection TV to reveal the front
control panel.
2
Press / button.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
.
.
or
.
/ / or .
MENU
MENU