Adjusting Colour Registration (Convergence); Introducing The Menu System - Sony KP-48PS1 Instruction Manual

First Time Operation - Menu System

Adjusting Colour Registration (Convergence)

Due to the earth's magnetism, the picture might become undefined and you could see different colours on the outlines of the images.
In that case, proceed as follows.

Introducing the Menu system

Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote
Control to operate the menu system:
VIDEO TV
1 2 3
4 5 6
7 8 9
0
PROGR
MENU
RM 892
S
10
First Time Operation - Menu System
Auto converge the Red, Green, and
Blue Lines
1
Press on the mark , on the front of the projection TV to reveal the
front connectors.
2
Press button placed on the right side of front connectors.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
Notes:
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
1
Press the MENU button to switch the first level menu on.
2
•To higlight the desired menu or option, push the joystick to
4 or $.
•To enter to the selected menu or option, push to z
•To return to the last menu or option, push to Z.
•To alter settings of your selected option, push to $/4/Z or z.
•To confirm and store your selection, press OK.
3
Press the MENU button to remove the menu from the screen.
Picture Adjustment
Picture Mode Personal Picture Adjustment
Picture Mode Personal
Contrast
Contrast
Brightness
Brightness
Colour
Colour Sharpness
Reset
Sharpness AI
On
Noise Detection
On
Reset Digital Mode DRC 50
Select: Enter Menu:
AI
On
Noise Detection
On
Digital Mode DRC 50
Select: Enter Menu:
Joystick:
$/4/Z or z
push to
press OK